How to Install Drawer Slides?

First of all, when installing the slide rail, it must be determined that it is a drawer. In general households, three sections of the slide rail are used. According to relevant data, the length of the drawer to be installed and the height of the hidden slide rail are used. Determine the cabinet to choose a very suitable sliding size so that the drawer can be installed in the drawer. This is the correct approach.

Secondly, after installing the slide rail, the five boards of the drawer are effectively combined. There is a slot on the drawer board, screw on the screw, and then there is a slot on the drawer board. After processing, the drawer can be placed in a good Adjust it on the sliding rail of the drawer. The nail hole and the position of the NT are exactly the same, at the top position, enter the lock drawer and slide.

Third. After completing the above steps, install the last cabinet. When installing the cabinet, we must tighten the plastic holes on the side panels, and then install the rails taken out from the top. Two small screws should be installed on the front and back of the general slide rail of the cabinet. In this way, the slide rails on both sides of the cabinet are fixed. It was finally installed and fixed.

The above is the size of the drawer slide rail and the installation process of the drawer slide rail you introduced.

Drawers are common in many places. Installing the drawer is not difficult. When choosing a drawer, users should pay attention to the material, weight and internal structure of the drawer, and only suck out the slide rail. A small part of the drawer, but it affects the full utilization of the entire drawer.

ZZ BEARINGS can provide for you with different type of drawer rollers ,for more informations just contact with us at  info@bearings-factory.com.